Corsair CW-9060025-WW Hydro Series H100i V2 240 mm Extreme Performance All-In-One Liquid CPU Cooler - Black

Product Information

if you put the system in standby, when waking it up you must restart CL or it will be freezed and fans will not follow settings So if 39C is your typical baseline coolant temperature at idle, set that to a comfortable fan speed. Start to ramp it up to moderate levels from +3-6C and then put a high speed flourish around 50C to let you know unequivocally things are getting hot without the need to stare at the software. I do that because on ICUE appears a section where it sais that when 45ºC are reached the leds lights of the H100iv2 turn red. In my case, would it be normal exceed 45ºC on the cooler temp without being harmful? If that is it, I would adjust the curve to make it less agressive, so when I play those games it could reach more than 45ºC without the fans being that noisy.

They need to re-write CL s/w..it's totally unreliable and and seems to be designed by someone with basic or very little windows internal knowledge. Please note: For iCUE 4 on macOS, currently only HID and audio products (listed below under HID gaming peripherals) are supported. I have a Corsair H100i GTX Cooler. After staying up til 4am (I started getting this issue after a bios update), I figured out what was wrong. The bios pump fan was set to auto. So what do we make of the tweaks in radiator design? Well, in our opinion, this was the key element of the second-gen release of the cooler. The H100i relied on very high-RPM fans to achieve class-leading performance, while the H100 v2 uses a bigger, denser radiator and lower-RPM fans with higher static pressure to achieve similar results. As you’ll see next, it is different, but is it better? Device path: \\?\SWD#PRINTENUM#{AF264D3E-87F5-4D85-BD89-742CADD79995}#{0ecef634-6ef0-472a-8085-5ad023ecbccd}

Effortless Installation

In my past professional role and experience in managing technology products, that list will require a lot of work to fix. They will need to take one of their own fans and try to modify them to work the pump controller. They will try to modify the pump controller - but's an expensive so will focus on a workaround with firmware. The CL is a major re-write.

This is another way to do it ... setting the header to PWM mode does supply the constant 12V of power. The PWM signal is ignored. I think it doenst matter what is the inicial temperature because If I start the computer with the default setting of starting ICUE when the computer starts, it starts as acelerated as before.radiator: Our Hydro Series coolers utilize a 120mm or 140mm radiator, thus the 240mm radiator provides about double the cooling surface. It will fit in almost any case with twin 120mm fan mounts that are spaced enough for a 240mm radiator.

It's fairly difficult to keep piling on heat with the fans at maximum, at least from CPU heat. What were you doing at the time? If you heat the case up with the GPU, you might see this. Not related specifically to fan control, but it would be good to figure out if there is something wrong with the cooler. What kind of room and case temperature do you have? When sitting at idle on the desktop, what is the coolant temperature? Does it stay level or slowly creep up?I am with you.. I have had mine since Nov 2012...with very noisy fans even on low speed...now the pump is making grindng /gurggling noises...LED's have stopped working...etc, etc. K70 RGB, K70 RGB PRO, K70 Lux RGB, K70 RGB Rapidfire, K70 RGB SE Rapidfire, K70 Lux, K70 Rapidfire, K70 PRO MINI Is that curve correct? When applying it, the computer works perfectly and it doesnt accelerate as heavily as before. On the desktop and playing non high-performance games, it works properly. But, in high-performance games the temperature keeps rising. Having the 100% rpm to 49ºC, I can stabilize the temp to 43ºC, being that the highest it rise. Nevertheles, I feel that the fans are overaccelerated and makes an unpleasant noise. Device path: \\?\SWD#PRINTENUM#{8491291A-B61F-4C9E-AED9-7D2BB2AE8FBC}#{0ecef634-6ef0-472a-8085-5ad023ecbccd}

Our first active-state test is 3DMark Combined, which is a great way to place a heavy load on both the CPU and video card without venturing into unrealistic territory with “power virus”-type loads. We ran this benchmark in a continuous loop for about 10 minutes before taking the measurements. The system noise and temperature had peaked according to our readings at that point. The Corsair Hydro Series is a good product.”}},{“@type”:”Question”,”name”:”Is the Corsair H100i v2 RGB?”,”acceptedAnswer”:{“@type”:”Answer”,”text”:” We used our high-end test platform to test the coolers, which consists of the following components:

Outperform The Competition

And now, if im running my pc without ICUE, and I restart the system, the H100i v2 fans do the same, 2700 rpm before BIOS screen. I read this forum now only a couple of time a week as i don't want to waste my time waiting for bull****s that are said since I've flashed with 1.0.4 firmware to solve my problems...lol They need to replace the controller h/w & s/w on the pump unit. Clearly the way it is designed today does not allow it to manage the fans properly or are the LED's reliable or provide a dedicated USB device interface (not a cluedgy HID). All right, with the introduction out of the way, it’s time to get into the nitty-gritty of Corsair’s former and current best-selling coolers!