Teltonika 4G-RUT240 Compact Industrial 4G LTE Router

Product Information

The CA file generated with this option automatically signs the certificates. In short, this option is used for convenience as it doesn't let the user set any additional parameters for the certificate files. Therefore, it should be used only when no other specific requirements are expected. This section provides information on network interface configuration. There are three main types of interfaces on the device: Prin prezenta, TELTONIKA NETWORKS declară că aparatul RUT240 este în conformitate cu cerinţele esenţiale şi cu alte prevederi pertinente ale Directivei 2014/53/EU The Root CA section is used to add a root CA certificate file to the device. There is a default file already preloaded on the device which will be overwritten by any uploaded file. The certificates must be in .pem format, maximum file size is 300 KB. These certificates are only needed if you want to use HTTPS for your services and the default file should be sufficient in most cases. The Update Firmware section is used to upgrade the device's firmware. Firmware can be upgraded either from server or from an image uploaded from your computer.

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.Core parameters or simply parameters that apply to each file type are the size and common name of the generated file(s).

The Add New User section is used to create additional users that can access the WebUI. After a new user is added, it will appear in the Users section. The Firewall Settings section is used to specify to which firewall zone if any this interface belongs. Assigning an interface to a zone may provide easier configuration of firewall rules. For example, instead of configuring separate rules for each WAN interface, you can add all WAN interfaces into a single firewall zone and make the rule apply to that zone instead. Improved MQTT to support multiple port listening, multiple bridge connections, notification settings and added support for custom configuration file RUT240 can also be configured as a mesh gateway or as a node (router) connecting to a mesh gateway.Hawnhekk, TELTONIKA NETWORKS tiddikjara li dan l-RUT240 huwa konformi mar-rekwiżiti essenzjali u dispożizzjonijiet rilevanti oħra tad Direttiva 2014/53/EU Generation creates additional 'signing request' files (which appear under the Certificate Manager tab) that are later used to sign the generated certificates. When this option is set to 'on', the device deletes the signing request files after the signing process is complete. The Fast Transition tab is only available when in General setup section 802.11r Fast Transition option is enabled. Note: Interface(s): lan have mtu lower than 1280 it will make all interfaces on same physical interface no longer support IPv4.

Do not leave your device and its accessories within reach of small children or allow them to play with it. They could hurt themselves or others and could accidentally damage the device. Your device contains small parts with sharp edges that may cause an injury choking hazard. Improved MODBUS Master service: added multiple datatypes, added multiple register reading for alarms

Teltonika RUT950 Dual SIM LTE Router with WiFi

Ensure that the voltage and the rated current of the power source match the device’s requirements. Do not connect the device to an inappropriate power source. The Certificate Generation tab provides the possibility to generate TLS certificates required for secure authentication and communication encryption used by some of the devices services. TELTONIKA NETWORKS ΔΗΛΩΝΕΙ ΟΤΙ RUT240 ΣΥΜΜΟΡΦΩΝΕΤΑΙ ΠΡΟΣ ΤΙΣ ΟΥΣΙΩΔΕΙΣ ΑΠΑΙΤΗΣΕΙΣ ΚΑΙ ΤΙΣ ΛΟΙΠΕΣ ΣΧΕΤΙΚΕΣ ΔΙΑΤΑΞΕΙΣ ΤΗΣ ΟΔΗΓΙΑΣ 2014/53/EU

The DHCPv6 protocol is used to set up an IPv6 interface which obtains its configuration parameters automatically via a DHCP lease. The Teltonika RUT240 is a compact, industrial, 4G LTE WiFi router for professional IoT applications. It delivers high performance for mission critical cellular communication. By default the remote file system will be mounted on /sshmount, directory will be automatically created if does not exist yet. Power on and connect with an Ethernet cable to the LAN port and your router should have reset to factory default settings. Fixed an issue where signal query would return invalid value instead of error in case of no signal in MQTT Publisher serviceThe Relay Configuration section is used to relay and dynamically redirect incoming connections to a target host. Its main purpose is extending the wireless network. For example, when the device is in Wireless Station (client) mode, it can be used to bridge WAN and LAN interfaces to create a larger wireless network. SSHFS is a tool, which allows you to mount a remote filesystem (in remote SSH server) to your RUT240 device using SSH. The UDP Broadcast Relay will listen for broadcast traffic on the specified port and relay that traffic to the specified interface(s). This equipment complies with IC RSS‐102 radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20 cm between the radiator and your body.