BeMatik - 4x1.5mm NL4 Speakon Speaker Cable 13GA 5m

Product Information

Sweetwater Sound, 5501 U.S. Hwy 30 W, Fort Wayne, IN 46818 Get Directions | Phone Hours | Store Hours

Van Damme NL4-NL4 cable (1.5M) - Sound Services

Direct replacement / successor: NL4FXX-W-S (cable O.D. 6 to 12 mm) and NL4FXX-W-L (cable O.D. 10 to 16 mm)Let’s say you’ve got a separate subwoofer cabinet and main speaker cabinet on each side of the stage. NL8 – IPS NL8 cables use Neutrik NL8FC connections at each end, so are Female to Female. They are manufactured with eight core 2.5mm2 cable as standard and are wired straight through as with all other cabling. They can be extended using NL8 barrel joiners (which are Male to Male). SpeakON connectors will have either a solder cup or a small captive screw type connection, which makes it easy to build your own speaker cables and repair them over time. When building them, you just need to make sure that you connect the positive and negative terminals of each pinset to the appropriate terminal on each side of the cable. The original and most common version of the powerCON is rated at 20 A. It comes in two deliberately incompatible variants to prevent people connecting two mains supplies together. If you are driving each loudspeaker in a cabinet separately, it’s important to set up an active crossover within the amplifier DSP or before the signal reaches the amplifier. In short, a crossover protects and optimizes each driver by distributing the high and low frequencies appropriately.

nl4 cable - Sweetwater nl4 cable - Sweetwater

For example, connecting a 2-channel amplifier to a 2-way speaker with an NL4 cable could allow you to power each driver with a separate amplifier. Instead of running a separate NL2 cable from the amplifier to each cabinet, you could use one NL4 cable, which could carry the subwoofer signal on pin set 1 and the main speaker signal on pin set 2. When you open up these three types of cables, you’ll see that NL2 cables have two conductors, NL4 cables have four conductors, and NL8 cables have eight conductors. However, the Gear4music extended warranty scheme provides an enhanced service, and is designed to offer a higher level of protection than many 'free' warranties offered by some retailers and manufacturers.

Get More at Sweetwater

NL2, NL4, and NL8 (or SpeakON) connectors are the industry standard in pro audio for connecting amplifiers to speakers.

Speakon Explained - Audiopile

Can someone please explain to me what they are, what they're used for, how do they work, cases where I should and shouldn't use them, pitfalls/warnings, etc? Thanks a bunch for your shared knowledge!! For customers in outlying areas of the country, the price of the Extended Warranty may be marginally higher, due to the potential for higher collection and redelivery transport costs.All this equipment is ready to hire now from IPS, and individual items can be hired, or complete systems can also be supplied. If you have any questions on the best system and cabling options for your event, please get in touch with us to go through the options. Almost all IPS speaker cabinets are fitted with NL4 speakON connectors – apart from the d&b V8, V12, V-SUB and J-INRA SUB speakers, which have NLT4 connection plates. This means that rather than a pair of parallel wired male NL4 connectors, there is effectively now an ‘In’ and an ‘Out’. If you are using all IPS NL4T cabling and speakers within a system, then it should all just work – unless you have for example a Y7P and a V-SUB, in which case the NL4T will be the wrong gender to link out of the sub into the top. This is easily fixed by using either a standard NL4 cable for the link, or if you are using all NL4 cable, then an IPS NL4T 0.5m speakON Adaptor Male - Male 4mm will make things connect again (or you can link in and out of the NL4 on the top). Seems straight forward enough- although very frustrating when you don’t have the correct cabling to hand. Services Guitar Workshop Electronic Repairs Workshop Music Store Events & Workshops Piano Showroom Music Lessons Recording Studio Many speaker cabinets contain multiple loudspeaker drivers. In some cases, you might use a separate amplifier channel for each driver within the cabinet.