equipment intended for use in domestic and non-commercial environments where potentially explosive atmospheres may only rarely be created, solely as a result of an accidental leakage of fuel gas. Everyone is familiar with the stylised Ex within a hexagon. This symbol is given in the standards that support both ATEX and UKEX, so does not change. The single coding on a label (familiar from ATEX) applies equally to ATEX and UKEX equipment.

Fume Extraction Fans (Chemical Resistant) - Auto Extract Systems Fume Extraction Fans (Chemical Resistant) - Auto Extract Systems

Electric motors are susceptible to over-heating when running on over-load, when their supply or self-cooling air is reduced, when ambient temperature is too high or when any part of the motor surface is thermally insulated by its installed situation. Any one of these conditions could lead to an explosion. Fume Cupboard efficiency can be increased with the integration of EC polypropylene fans for maximum efficiency. Our EC range of corrosion resistant fans can reduce fan energy consumption by up to 20% without affecting performance. Due to the chemical composition of the substances used in schools and universities, the fume cupboard extract fans need to be able to handle the corrosive air without risk to the operation. Axair offers specifically designed polypropylene fans for this type of application as the material properties allow the fan to operate in the corrosive air stream. Learn more about reducing fan energy consumption in fume cupboards here. The SEAT S35 models were applied to the extract hoods over the laboratory furnaces. Supplied complete they were delivered with weather pedestals, flexible connectors, anti-vibration mounts and flanges. We also supplied an S20 fan for use with a small specto-analyser. A fume extraction fan is most effective when used in conjunction with other types of products and accessories. Whether you require additional components to go with a fan depends on several factors, including your operational tasks, environment size and installation location.

OEMs, Contractors, Mechanical Engineers and Specification consultants entrust Axair Fans with their industrial fan selection for a wide range of applications including air handling units, water treatment, fume extraction, commercial kitchen ventilation, biomass, fan coil units and much more. Our team of in house technical engineers are experts in their niche field, split into the OEM and Industrial division, your enquiry will be directed to the right team to correct select the fan you require. View all industrial fans using the product selection categories below or search by the main navigation menu. A variety of construction materials to suit client specification – eg. PVC, Polypropylene, GRP reinforcement The systems are fabricated in our Manchester-based factory by a highly skilled team of plastic fabricators and CNC machine operatives, and are individually engineered for optimum efficiency, reduced noise levels and energy conservation.

Funme Hand held Fan Rechargeable Powerful Fan Strong Wind Funme Hand held Fan Rechargeable Powerful Fan Strong Wind

Which can be pre-wired to the motor terminal to ensure first class electrical work in factory conditions and an isolator fan on the indoor or outdoor pedestal.

Enclosure Climate Control

Another product from Auto Extract that you can use with a fume extraction fan is a cabinet. Fume cabinets are ideal for situations where maximum efficiency is necessary when extracting harmful fumes. The cabinets are designed to allow operators to see through the cabinet while working, yet protecting them at all times by safely controlling exposure. The fume extract fan will collect and dispose of fumes before they become airborne. Certain environments, such as laboratories, may require fans that can withstand corrosive fumes or explosive gasses. Model FJC-300 is a belt-driven, arrangement 10 unit available in either coated steel and bolted or welded construction, or a galvanized finish and bolted construction. The unit has a compact footprint with motor and drives located under a common weather hood. A corrosion resistant coating allows for use with corrosive exhausts such as those found in wastewater treatment plants, medical instrument sterilization, or isolation rooms. ATEX is an acronym derived from the words “Atmospheres Explosibles” that is soon to be superseded by the term UKCA EX or UKEX in the UK, and forms part of a European equipment directive known as ATEX 2014/34/EU. ATEX 2014/34/EU was adopted within the UK Statutory guidance following Brexit, titled:

School Fume Fan Pack | Axair Fans UK School Fume Fan Pack | Axair Fans UK

Our standard range of polypropylene centrifugal fans are suitable for hazardous environments where airflows of 2000m³/h to 17,000m³/h are required. The demand for more energy efficient systems in laboratories within schools, colleges and universities has seen an increase in designers and installers integrating EC polypropylene fans into new and existing fume cupboard systems. Our range of energy efficient corrosion resistant fans with IE5 B34 type EC motors reduce fan energy consumption by up to 20% without affecting the performance of the system and are available in single or three phase versions. One product that you can pair with a fume extraction fan is an extraction arm. Extraction arms provide a flexible solution for capturing harmful contaminants. The arm can be easily moved to capture fumes and dust at the source. Extraction arms connect to a hose that removes hazardous particles before they have a chance to reach workers. We offer fume extraction arms and laboratory extraction arms, providing businesses with plenty of choices to implement a solution that suits them the most. Our corrosion resistant fume fans are are designed for applications where potentially corrosive chemicals and hazardous gases are present in the environment or in the air stream. Learn more about polypropylene chemical resistance here.ATEX rated non-sparking versions of our corrosive extract fans are required where there is the potential for explosion. Some common examples would be: We can also pre-wire to electrical isolators to the motor terminal to ensure first class electrical work in factory conditions and an isolator fan on the pedestal. Equipment and protective systems intended for us in potentially explosive atmospheres regulation 2016. There is always a risk of accidents happening where there is a large variety of chemicals stored or where there are ongoing operations producing vapours and corrosive gases. Fume cupboards prevent potentially dangerous vapours being released into the classroom in two main ways; through ducting or through filtered, recirculated air. Ducted fume cupboards draw air through the sash opening over the working area and through ducting to the outside of the building, most often the roof. This method is widely used as it suitable for extracting more toxic vapours than recirculating filtered fume cupboards. The latter is more suited to experiments using much less hazardous substances. Additionally, school fume cupboards act as a physical barrier between reactions and the classroom or laboratory. This provides a degree of protection against inhalation exposure, chemical spills and fires. All speed controllable ATEX motors receive less cooling air on speed reduction and must therefore be supplied with thermistor over-temperature sensors to protect against shell temperature in excess of the motor temperature class. Exclusions