Ironing method: Place a clean, white cloth or towel over the moisture stain and set your iron to its lowest heat setting. Gently iron the cloth, moving it in circular motions for about 15 to 20 seconds. The heat from the iron will help lift the moisture from the wood, removing the white stain from its surface. This is best for deeper, older stains, especially if you’re working with a varnished or painted surface. Sand the area: Use fine-grit sandpaper to gently sand the burn mark, either by hand or by using a sanding tool. This removes the top layer of the wood and is excellent for dealing with surface-level burns. Be careful not to sand too aggressively, as this can damage the wood further and leave an uneven surface.

Although the above cleaning practices can remove most stains from wooden surfaces, prevention is a better solution. Mineral spirits: Mineral spirits are effective at lifting dirt, grime, and stains without harming the finish of the wood. Remember to test in an inconspicuous area first to ensure no damage will occur. Then, dampen a cloth with mineral spirits and gently rub the stained area using circular motions. The mark should start to lift from the wood. My verdict: I followed the advice to mix two parts bicarb with one part water to make a paste and worked the solution into the stain, starting with a fairly dark ring mark. It was ineffective on this stain. In fact, it’s key to maintaining the beauty of your wooden furniture and floors. Here are some top tips you can employ to protect your wooden surfaces: We also send coronavirus updates at 5pm on weekdays, and a round up of the week's must-read stories on Sunday afternoons.

How to use Liberon Ring Remover

The ironing method made little difference to this stain —and there were no significant changes to the white stains either. (Image credit: Future/Natasha Brinsmead) 2. Does bicarbonate of soda and water remove water stains? The verdict: I started by trying it out on the very dark water stain under the coffee machine. After some scrubbing (the product comes as a powder that needs to be worked into the stain with a wet cloth or sponge), the stain had, much to my surprise, noticeably lightened. All gone! The bicarbonate of soda worked on the lighter water marks but had little effect on older ones. (Image credit: Future/Natasha Brinsmead) 3. Can mayonnaise remove water rings? Rustins Ring Remover 125ml is a perfect renovator for wood as it is a fine mixture of abrasives that will remove ring marks, water and heat mark damage from a wide range of wooden surfaces. For instance of lacquered, varnished and French Polished surfaces. If, like many others, you are keen to keep your home chemical-free, you will be pleased to learn that many of the methods of removing water stains from wood can be carried out with natural products alone —kinder on you and the planet.

Moisture can enter the wood through a variety of ways, such as leaks, spills, or even high humidity levels in the surrounding environment. The heat expands the timber, opening up pores that moisture can then penetrate. When the area cools down and the wood contracts again, the water then becomes trapped beneath the surface.The very dark, ingrained water mark I discovered under the coffee machine. (Image credit: Future/Natasha Brinsmead) 1. What is the steam and clean method? Use coasters: One of the easiest ways to avoid stains is to use coasters, placemats, and tablecloths to protect wooden tables. Hot dishes can easily burn wooden surfaces, condensation from cool glasses leads to water rings, and food spills can lead to dark stains. Putting something between the table prevents these stains from forming.