Everbuild Wood Preserver | Penetrates and Preserves for Long-Lasting Protection - Suitable for Sheds, Trellis, Pergolas and Gazebos - 5 Litre - Clear

Product Information

Ensure that wooden surfaces to be treated with Barrettine Wood Preserver are clean, dry and free from surface dirt, debris and other surface contaminates. New Bare Wood Wood that has been oiled in the last year should be allowed to weather for at least one year or until the wood preservative is able to penetrate through to the timber P101 If medical advice is needed, have product container or label at hand.P102 Keep out of reach of children.P103 Read carefully and follow all instructions.P273 Avoid release to the environment.P391 Collect spillage.P501 Dispose of contents/container to … Apply Barrettine Wood Preserver using a synthetic brush, microfibre roller or shed & fence spray system*

Whatever colour or non-colour you go for, at least you won’t have to put up with the fluorescent yellowy green colour of creosote, which used to be the only wood preserver you could get. Thankfully creosote – noxious, toxic and highly flammable – is no longer sold to the general public. Are wood preservers all solvent-based? I’m worried about fumes indoors.Clear, Odourless formula – Increases the lifetime of timber by preventing wood destroying, wood discolouring fungi and woodworm. Barrettine’s preserver does contain some wax for water resistance, but despite this it acts as a good base for paint and varnish. But it does a sterling job of repelling water, sun-fading, rot, insects and other wood-worriers all by itself, as well as bringing out the natural grain of the wood. You can also get a 5l version. Barrettine Premier Wood Preserver is a high-quality, low odour, oil based wood preserver that is deep penetrating. Barrettine wood preserver is used for wood protection against wood-destroying fungi (wet rot), wood discolouring fungi and wood-boring insects. So, you can potentially use it on your old shed, but you should prepare the wood first. Otherwise you’re wasting your time and money.

Most wood preserver is a clear liquid that darkens the wood’s natural colour, but you can also get wood preserver that contains coloured dye, so it stains at the same time as protecting. Whether you go for clear or coloured is a matter of taste. If protecting the natural colour of the wood is important, use the clear preservative then overcoat with Osmo UV Protection Oil Extra or Fiddes Exterior High Build Wood Oil. Apply by brush onto timber at a rate of 5 m2 per litre. Apply in 2 – 3 coats depending on the porosity of the wood species. Do not apply if rain is forecast in the next 48 hours to allow time for Roxil Wood Preserver to dry and the application of a top coat.Wood preserver is basically an undercoat. You brush or spray it onto raw, freshly sawn or sanded wood surfaces to stabilise the wood’s moisture content and protect it from rot and decay. How to choose the best wood preserver for you What’s the difference between wood preserver and varnish?

Always do a test area before starting any project and follow the manufacturer's instructions on the tin at all times. Only apply in temperatures of between 10°C and 30°C. Shake or stir well prior to and during application to ensure a consistent colour. H410 Very toxic to aquatic life with long lasting effects.EUH 208 Contains. May produce an allergic reaction. No subsequent topcoat is required unless for aesthetic purposes. Barrettine Wood Preserver is for outdoor use and also for use on windows/frames, external doors/frames (internal & external sections). The Barrettine Wood Preserver Clear can also be used on structural timbers in unoccupied areas such as floor joists.used and allow 24 hours or more for timbers to fully dry before further treatment. Timber to be treated should be reasonably dry before treatment although the product will penetrate into damp timbers. Do not apply if rain is forecast in the next 48 Water-based wood preservers such as Cuprinol tend to be easier for most people to work with. They dry faster than most solvent-based preservers, and are much lower in VOCs (volatile organic compounds), the substances mainly responsible for petrol-type smells. Water-based products are also much easier to clean off brushes.