NEW products: 4% of the current new selling price to double the warranty from 1 year to 2 years. 4% for each additional year. As mentioned before, any sound (whether isolated or made by a number of sources like in a band) will form a sonic footprint. This sonic footprint is registered by our ears as one thing. How those different sources are put together will determine how it sounds to us.

Warmth: this is often a wide hump centred around the mids; think the sound of the Ibanez Tube Screamer I recommend not increasing the gain all the way on the MXR pedal, but rather using it somewhere around the +6 and +8 dB mark. Then, set the rest of the gain through your amplifier. This is great for stereo rigs. Let’s say you have two amps, one very bright and one very warm sounding… Brian Wampler is known in the guitar community as the king of overdrive, but this man and his company have made more than just good distortions. The EQuator is one of those pedals.The EQ pedal should be used sparingly if you want it to be a utility pedal. It can be used to create certain ‘effects’ such as the AM radio tone like you might hear from The Strokes or for heavily scooped mids that might be heard on old Pantera records. In music an equalizer is used to alter the frequency response of an audio system (or amplifier or speaker etc.) using linear filters. These simple filters can alter the sound of a song or your guitar in this case.

Both a parametric EQ with 3 bands, or a graphic EQ with 5 or more are going to give you radically more control over your tone than almost any guitar amp. How we choose the best EQ pedals Even the slightest changes make a massive difference in your guitar tone thanks to its design that gives you 18dB headroom. If you look at other EQ pedals in the market, you will notice that most of them operate with a 9V power supply.

Your Turn to Sound Off!

The central set of faders allows you to boost or cut certain frequencies with a +/- 12dB range. This level of control can be used in a wide range of applications. A bassist could cut the highs and boost the lows for a more thundering, fundamental bass tone. An acoustic guitarist could boost the mids for extra warmth, and an electric guitarist could use it to boost the treble frequencies when they want to launch into a soaring solo. These are just a few examples of what's possible with the 10-Band EQ, use it as an "always-on" replacement for your amp's EQ or use it to instantly change your sound mid-song at the press of a button.

For example, if you’ve heard that a Fender Deluxe Reverb has a great mid-range tone, pull down your highs and lows a little bit on the EQ pedal to accentuate the mids. Or, you could try increasing the mid-range if you prefer to boost. Get total control over your sound with the MXR 10-Band EQ. With ten EQ sliders for controlling a wide range of frequencies, volume and gain sliders, and dual output, the MXR 10-Band EQ offers powerful and versatile tonal control. This will set up the EQ pedal inside your amp’s FX loop, which is designed to be after the preamp (which adds gain) but before the power amp (which adds volume). This, combined with a beefy, distorted amp tone, should get you a fuzzy tone that sounds heavy and has a lot of presence even in a full band mix (Pro Audio Land has some more settings too).There are ten EQ sliders for a wide range of tonal control selected at the most musical frequency centers. You can individually cut or boost each frequency to shape your tone. With + or – 12db you can get 4x the output or 4x the reduction at the selected frequency. In addition to the EQ sliders, there is a gain slider that controls the signal level going into the pedal, and a volume slider that controls the overall effect volume for ultimate control of your signal. All sliders feature a glowing LED, which will blink if the signal is clipping. If price is not an issue, the Source Audio SA-270 might be the boutique EQ pedal that piques your interest. This is an excellent pedal for finding the proper frequencies for your sound. It's suitable for any musician who's plugging into effects pedals, or who needs a bit of tweaking. It doesn't come with presents, so you do need to adjust the tweaks yourself on the go. However, once you've used the EQ a few times, it's quite easy to figure out where you need to make adjustments to give you the sound you need. Pros You’ll have to rely on your ears to do this accurately, but you can often find information online that helps. For example, if you want to convert a Marshall JCM amplifier to get a Mesa Boogie’s tone, find out the frequency curve of the Marshall and the Mesa.