Keracolor Clenditioner Color Depositing Conditioner Colorwash - Instantly Infuse Color into Hair, 15 Colors | Cruelty Free (Merlot)

Product Information

The surfaces are ready for traffic after 7 days. Water features and swimming pools may be filled up 7 days after grouting. Water/Aqua/Eau, Cetyl Alcohol, Glycerin, Behentrimonium Chloride, Cocamidopropyl Betaine, Stearamidopropyl Dimethylamine, Sorbitan Laurate, Cocamidopropyl Hydroxysultaine, Phenoxyethanol, Caprylyl Glycol, PEG-12 Dimethicone, Fragrance (Parfum), Hydrolyzed Keratin, Cocos Nucifera Oil, Butyrospermum Parkii Butter, Rosa Moschata Seed Oil, Simmondsia Chinensis Seed Oil, Prunus Amygdalus Dulcis Oil, Citrus Grandis Fruit Extract, Citric Acid, Tocopheryl Acetate, Tetrasodium EDTA, Limonene, Linalool, Basic Red 51, Basic Orange 31, Basic Brown 16.

Water/Aqua/Eau, Cetyl Alcohol, Glycerin, Behentrimonium Chloride, Cocamidopropyl Betaine, Stearamidopropyl Dimethylamine, Sorbitan Laurate, Cocamidopropyl Hydroxysultaine, Phenoxyethanol, Caprylyl Glycol, PEG-12 Dimethicone, Fragrance (Parfum), Hydrolyzed Keratin, Cocos Nucifera Oil, Butyrospermum Parkii Butter, Rosa Moschata Seed Oil, Simmondsia Chinensis Seed Oil, Prunus Amygdalus Dulcis Oil, Citrus Grandis Fruit Extract, Citric Acid, Tocopheryl Acetate, Tetrasodium EDTA, Limonene, Linalool, Basic Blue 99, Basic Yellow 57, HC Blue 15. MAPEI Flexcolor 3D is a professional-grade, ready-to-use (RTU) translucent specialty grout with an “iridescent effect” finish. It is offered in 10 designer colors with translucent characteristics that not only reflect but also refract light. This allows the grout to transition in color to complement the tile color. The “translucent effect” is most noticeable with the color Crystal Moon (#201), while the other nine colors exhibit a more pronounced “iridescent effect.” Fill the joints with the prepared Mapei Keracolor SF mix using a special MAPEI trowel or rubber squeegee, without leaving any gaps or steps. Remove any excess Mapei Keracolor SF from the surface, by moving the trowel or squeegee diagonally across the joints while the mix is still fresh. By the end of the 70s more than 97.5% of homes in Britain owned at least one television set, a figure which has actually fallen in recent years.Coconut oil: Promotes scalp health, moisturizes hair, adds luster shine and softness, and helps protect hair from breakage and environmental damage The lighter and more 'white blonde' the hair is the more true to tone the results from Color + Clenditioner will be. Water/Aqua/Eau, Cetyl Alcohol, Behentrimonium Chloride, Glycerin, Stearamidopropyl Dimethylamine, Cocamidopropyl Betaine, Sorbitan Laurate, Phenoxyethanol, Cocamidopropyl Hydroxysultaine, Fragrance (Parfum), Caprylyl Glycol, Citric Acid, PEG-12 Dimethicone, Palmitamidopropyl, Dimethylamine, Tetrasodium EDTA, Sodium Metabisulfite, Tocopheryl Acetate, Butyrospermum Parkii Butter (Shea Butter), Cocos Nucifera Oil (Coconut Oil), Propylene Glycol, Hydrolyzed Keratin (Keratin), Prunus Amygdalus Dulcis Oil (Almond Oil), Rosa Moschata Seed Oil (Rose Hip Oil), Simmondsia Chinensis Seed Oil (Jojoba Oil), Citrus Grandis Fruit Extract (Grapefruit Extract), Hexyl Cinnamal, Linalool.

To maintain Color + Clenditioner results, alternate with Clenditioner. Color will start to lighten with each wash when a traditional shampoo is used. good compressive and flexural strength and good resistance to freeze/thaw cycles, and therefore optimum durability; The surface of some ceramic tiles or stone materials are rough or contain micro-porosities. It is recommended to carry out a sample test to verify cleanability and when necessary, apply a protective treatment over the surface, but avoiding penetration into the joints. When grouting a swimming pool which is due to be disinfected through saline electrolysis please use Mapei Ultracolor Plus Tile Grout or Mapei Kerapoxy Epoxy Tile Grout.Water/Aqua/Eau, Cetyl Alcohol, Glycerin, Behentrimonium Chloride, Cocamidopropyl Betaine, Stearamidopropyl Dimethylamine, Sorbitan Laurate, Cocamidopropyl Hydroxysultaine, Phenoxyethanol, Caprylyl Glycol, PEG-12 Dimethicone, Fragrance (Parfum), Hydrolyzed Keratin, Cocos Nucifera Oil, Butyrospermum Parkii Butter, Rosa Moschata Seed Oil, Simmondsia Chinensis Seed Oil, Prunus Amygdalus Dulcis Oil, Citrus Grandis Fruit Extract, Citric Acid, Tocopheryl Acetate, Tetrasodium EDTA, Limonene, Linalool, HC Blue 15, Basic Red 51. Mapei Keracolor FF is a blend of cement, very fine-graded aggregates, special polymers, additives and pigments. The use of special hydrophobic additives (DropEffect® technology) gives grouting mortars highly water repellent properties, making them less prone to dirtiness and with excellent durability. The following features are obtained when mixed with the right water ratio and used correctly: Do not mix Mapei Keracolor SF Tile Grout with cement or other products, and never add water once it has started to set. Water/Aqua/Eau, Cetyl Alcohol, Glycerin, Behentrimonium Chloride, Cocamidopropyl Betaine, Stearamidopropyl Dimethylamine, Sorbitan Laurate, Cocamidopropyl Hydroxysultaine, Phenoxyethanol, Caprylyl Glycol, PEG-12 Dimethicone, Fragrance (Parfum), Hydrolyzed Keratin, Cocos Nucifera Oil, Butyrospermum Parkii Butter, Rosa Moschata Seed Oil, Simmondsia Chinensis Seed Oil, Prunus Amygdalus Dulcis Oil, Citrus Grandis Fruit Extract, Citric Acid, Tocopheryl Acetate, Tetrasodium EDTA, Limonene, Linalool, Basic Yellow 87, Basic Brown 17. Pour the Keracolor SF into a clean, rustfree container of clean water or Fugolastic (if required for the application) while mixing, at a ratio of 30-33% by weight. Stir the mix, preferably with a low-speed mixer to avoid drawing in air, until a smooth paste is obtained. Let the mix stand for 2-3 minutes, and stir again briefly before use. Use the mix within 2 hours of its preparation.