Danalock V3 BT Z-Wave Silver EURO

Product Information

Activates pairing mode to be used with Danapad V3 in cases where there is no app to provide the service. Should only be used when necessary. Easy to fit.Easy to install to any kind of door. See the installation guides in the Product Files section below. On most Android phones today, the phone removes the app's permissions if the app isn't used for a couple of months - meaning if the app is not opened! We make use of the phone's built-in location functions and can't guarantee that this feature will work consistently on your phone.

Open the door, insert the key, and turn it. If the thumbturn on the inside of the door doesn’t rotate along with the key, you need to enable End to End Operation. Invitations of additional users can only be made in the Home app: Press the Home symbol in the top left corner -> Home Settings -> + Invite people. If you use a key on the inside, you can in most cases simply replace the inside cylinder with the tailpiece in the box. Look for "Permissions" or similar and set the location permission to "Always/Allow all the time " or similar. I wouldn’t buy the bridge, just my 2 cents, I had the bridge running on a phone for a long while, and it was very unstable, so I switched to HA as they were simply too slow to release the standalone bridge (waited for more than a year), and now operate it through that, works every time.We are currently working on reimplementing the Airbnb feature. We can't say when this will be released.

For Euro cylinders, you will need to have a cylinder with a tailpiece mounted. This type of cylinder can be bought separately.This list is not the full list of hubs to support pin codes, but is the hubs we have been able to confirm. If you can't get the devices to go into the app-less pairing mode make sure both devices have the latest firmware.