Aruba Instant On AP22 802.11ax 2x2 WiFi Access Point | UK Model | Power Source not Included (R4W02A)

Product Information

Bosch AP22U Wiper Blade - Single provides a clearer, smoother and quieter wiping performance than conventional wiper blades. Features built in aerodynamic spoiler and new technological tensioned metal strip for precise uniform distribution of pressure along the wiping edge. This helps to keep the blade closer to the windscreen, ensuring clear vision at high speeds and reduced wind noise.

The range difference between the AP22/U6-Lite and the U6-LR is big enough that it could be the difference between needing one or two APs to cover an area. In some situations one U6-LR is better, in others one or two U6-Lite/AP22s may be better. It’s hard to make general conclusions. The AP22 clearly offers the best 2.4 GHz performance. 5 GHz performance depends on a lot of factors, but the U6-LR and the AC-HD performed the best overall. The AC-Pro, AP12, and AP15 all struggled with 80 MHz channels to a single client. I don’t have a reliable way to test multi-client performance yet, but they should offer more performance in multi-client tests and realistic use. Enables a 25% data increase over 256 QAM, improving throughput in your access points and devices. Trusted Platform Module (TPM) Since Instant On was introduced in 2019, software updates have come out regularly and usually add a few more things to the cloud interface. For now though, the settings are quite limited, and I don’t think Instant On is ever going to match the full UniFi controller levels of settings. UniFi is the better option for tinkerers, but Instant On is great for delivering the basics without hassle.When further away, you can also see the impact of beamforming from the AC-HD and U6-LR. They are able to compensate by directing transmissions towards the distant client, and the U6-LR performed the best at the furthest location. This is where the U6-LR shows it’s biggest advantage over the AP22. The U6-LR’s high transmit power and beamforming allow it to reach further than the AP22, U6-Lite, or any of the other models I tested. A few extra dBm is enough to allow the U6-LR to effectively cover a larger area, or punch through one more wall. consumption, extending the battery life of clients. Multiuser, Multiple Input, Multiple Output (MU-MIMO)

That said, I don’t think there’s a big rush to upgrade to a Wi-Fi 6 network. For most networks the performance the AP11 offers is enough, and deploying a few of those would cover most typical home or small business network needs. If you want the extra performance, you’ll have to spend almost twice as much to step up to the AP22. If you need or want LAN ports, the AP11D is the only option. If you’re considering a new Instant On network, I have no issues recommending the AP22. The AP12 or AP15 should be better for high-density networks, but I still think the AP22 is the best overall. When the Wi-Fi 6 replacements for the AP12 and AP15 arrive, I’ll be testing those. I’m also excited to test out the UniFi U6-Pro, which is currently in early access. The Instant On cloud portal offers easy setup and remote access, but it is limited in the number of settings it offers. For Wi-Fi radio settings, all you’re able to control is channel width, transmit power range, and channel selection. This is both good and bad. The things you can’t control are handled automatically for you, and Aruba’s engineering and software do a good job of handling things behind the scene. The most interesting comparison for Instant On APs is the AP22 vs the AP12 and AP15. I was disappointed in the performance of the AP12 and AP15 when using wider channels. The charts above only capture single-client tests, which is not the best way to show the AP12 and AP15’s strengths. Still, they weren’t able to match up against the (much more expensive) AC-HD. I wouldn’t generally recommend the AP12 or AP15 unless you’re deploying them in a dense area with a lot of devices.To specify which AP and which band was being used, I used the setttings offered in the UniFi network controller or Instant On portal, and swapped them in and out as needed. I then stepped through the different channel widths and bands, letting the connection stabilize before beginning my tests. Beyond Wi-Fi 6, there’s also the promise of Wi-Fi 6E on the horizon, which is a more meaningful upgrade than the 10-20% speed improvement you can expect from upgrading from a good Wi-Fi 5 AP. Wi-Fi 6 and 6E are only relevant when you have clients that support them. Wi-Fi 6E devices are just starting to roll out in 2021, and it will be a while until it’s common for most home users. If you are happy with your Wi-Fi network, it could be a good idea to hold off on upgrading. If you’re looking for an upgrade now, the AP11 and AP22 are great options. The one thing you won’t find is a large range of Wi-Fi configuration options. Aruba handles all of this behind the scenes and the only Wi-Fi 6 setting in the dashboard is a toggle to turn it off if legacy clients are having trouble connecting to the network – which in our experience is a rare issue that you’re unlikely to encounter. You should also be aware that ultrawide 160MHz channels aren’t available, but this isn’t a deal-breaker for SMBs as few clients support it anyway. The range difference between the AP22 and the U6-LR is big enough that it could be the difference between needing one or two APs to cover an area. In some situations one U6-LR is better, in others one or two AP22s may be better. It’s hard to make general conclusions.