ASICS Gt-2000, Men's Gt-2000 9

Product Information

In the absence of harmonised European standards, Member States shall take the necessary measures to inform parties concerned of those existing national standards and technical specifications which are regarded as important or useful for ensuring proper transposition of the essential requirements referred to in Article 3(1).

The affixing on safety components of markings which are likely to mislead third parties as to the meaning and form of the CE conformity marking shall be prohibited. Any other marking may be affixed to the safety component, provided that the visibility and legibility of the CE conformity marking are not thereby reduced. Each Member State shall lay down procedures for authorising the construction and the putting into service of installations which are located within its territory. And as someone who is always wary of ankle and Achilles tightness or strains, the heel felt comfortable and reliable for plenty of miles. No heel slipping I was able to test these shoes out mostly on roads and hard surfaces, including rainy wet days along with hot summer days--my feet felt comfortable with each step through it all. I was even able to get these shoes on some moderate trails, and they seem to handle the dirt, gravel, and mud just fine! Delicate heel collar and tongue materialThe improved mesh is more flexible and breathable. You will find a seamless constructed upper which means there are no points of irritation. the technical design specifications, including the European specifications referred to in Article 2(2) of this Directive, that will be applied and, where the European specifications will not be applied in full, the means that will be used to ensure that the essential requirements of this Directive that apply to the products will be met, the means to monitor the achievement of the required design and component quality and the effective operation of the quality assurance system. a) submit the safety component to a conformity assessment procedure in accordance with Annex V, and I find the satin-like upper material for the heel collar and the tongue to be almost too delicate to the touch. While there have been no particular wear issues at this point related to the material, it feels too delicate for a running shoe. Tends to retain moisture

Safety components should bear the CE marking to be affixed either by the manufacturer or by his authorised representative established within the Community. The CE marking means that the safety component complies with the provisions of this Directive and those of other applicable Community Directives on CE marking. the design control and design verification techniques, processes and systematic actions that will be used when designing the components pertaining to the category of components covered,

Pages

The manufacturer must, for a period ending at least 30 years after the last component has been manufactured, keep at the disposal of the national authorities: the list of the European specifications referred to in Article 2(2) of this Directive, applied in full or in part, and descriptions of the solutions adopted to meet the essential requirements where the European specifications referred to in Article 2(2) of this Directive do not exist, Directive 95/16/EC of the European Parliament and of the Council of 29 June 1995 on the approximation of the laws of the Member States relating to lifts (OJ L 213, 7.9.1995, p. 1). The application must enable the design, manufacture and operation of the component to be understood, and shall enable conformity with the requirements of This Annex sets out the essential requirements, including maintainability and operability, applicable to the design, construction and entry into service of installations referred to in Article 1(5) of this Directive.

The GT 2000 9 will allow your feet to breathe in comfort! The softer mesh upper provides for plenty of ventilation, especially in the heat of the day during those longer runs. European specification" shall mean a common technical specification, a European technical approval or a national standard transposing a European standard. Council Directive 85/337/EEC of 27 June 1985 on the assessment of the effects of certain public and private projects on the environment (OJ L 175, 5.7.1985, p. 40). Directive as last amended by Directive 97/11/EC (OJ L 73, 14.3.1997, p. 5). Each notified body must give the other notified bodies the relevant information concerning all quality system approvals issued and withdrawn.

Installations for which authorisation has been given before the entry into force of this Directive and for which construction has not yet started must comply with the provisions of this Directive, unless Member States decide otherwise, stating their reasons, and an equally high level of protection is achieved. The Commission shall ensure that the Member States are kept informed of the outcome of the procedure. This module describes that part of the procedure by which a notified body ascertains and attests that a specimen, representative of the production envisaged, meets the provisions of this Directive. Member States shall take all necessary measures to ensure that subsystems within the meaning of Annex I are placed on the market only if they permit the construction of installations complying with the essential requirements referred to in Article 3(1).