Ubiquiti UAP-AC-M UniFi AC Outdoor Mesh, Black

Product Information

The quoted wireless specification is given as the maximum radio performance. Achievable range and throughput will vary depending on the regional regulations where the radio is deployed. This is the most common problem for users self hosting the UniFi Network Server, especially those using Windows. Note: Both APs must use the same channel or else you risk breaking your meshed connection . Make sure you have a suitable RF environment before using wireless meshing. It is always preferable to hardwire your equipment to your central router/gateway for optimal performance and stability. This is because meshed networks are heavily impacted by their environments. Too much radiofrequency (RF) noise may result in client or AP disconnections. Minimize the number of wireless 'hops.'

Remove any restrictive firewall rules that would prevent IP connectivity between the device and console.

What is a Mesh Network? 

A factory reset is useful for a creating fresh setup of a UniFi Console, or device that was already configured in a managed state. Restoring with the Reset Button Open TCP Port 8080 and UDP Port 10001 locally (LAN) on all gateways, firewalls, and antivirus software. A mesh network consists of access points (AP) that are wirelessly connected to each other with client devices connected wirelessly to them, opposed to everything being hardwired to your network. This enables you to minimize dead-zones and create a continuous wireless network when it is difficult to run cable to certain locations.

With supports for multi-hop meshing the UniFi AC Mesh can be deployed just about anywhere without each access point requiring existing data infrastructure. Just connect an 24v Passive or 802.3af power supply and ensure the device is with range of another access point and the UAP-AC-M can start extending existing Wi-Fi coverage. Although you can uplink one wireless AP to another wireless AP, this is not recommended. Each wireless 'hop' from its internet source will reduce stability, and will also result in nearly 50% performance decrease. Due to this, we recommend a maximum of only two hops for a wireless AP. Minimize the number of APs connected to the same uplink 'parent.' All UniFi devices can be restored to their factory defaults via their respective web or mobile applications. This is located in the Manage section of a device’s settings. Depending on the application, this may be referred to as Forget (UniFi Network) or Unmanage (UniFi Protect). This will occur if the device was managed by another instance of a UniFi application. This includes cases where the UniFi Console (e.g., Dream Machine Pro, or Cloud Key) was factory restored, because the UniFi device still considers itself as being managed by the 'old' application console, prior to restoration.

Standalone Mode should only be used when configuring a small quantity of APs because they do not support seamless roaming. Instead, you will need to manually connect to each AP as you move out of range. Also, APs must have a wired connection to your network; wireless meshing is not possible. Finally, remote management is not possible because it is done entirely through the UniFi Mobile app while locally connected to your WiFi. Factory reset the device by holding the power button for 10 seconds, or until the light begins flashing. Two adjustable external omni antennas are included with the UniFi AC Mesh Access Point. There is also the option to expand the coverage range and customise pattern shaping by using the included fast-mount adapter to install the AP on an optional connectorised antenna. UniFi Controller Software With the UniFi controller software you can create a highly scalable, end-to-end system of devices spanning multiple locations across the world — all controlled by a single interface accessed via the Internet or local network.