Joined in 2023 
82 
63 About this deal
Dimmers allow you to achieve the exact light level that you desire in a room and consequently alter the mood. There are various types of dimming options available, but the most popular are ‘phase control’ (or phase-cut) dimmers. Phase control dimmers work by chopping out parts of the voltage and reducing power to the light source. The two types of phase control dimmer available are ‘trailing-edge’ and ‘leading-edge’ and they work in different ways which ultimately affects their compatibility with certain light forms: Leading-edge: inductive loads (e.g. magnetic low voltage transformers), resistive loads (e.g. incandescent). The Cloudy Bay in Wall Dimmer Switch for LED Lights is a toggle switch with a small dimming slider, and it functions in both single pole and 3-way installations. The dimming slider is a little on the small side, but it doesn’t get in the way of the switch. It’s fully compatible with all Cloudy Bay LED light fixtures right out of the box, and it also includes a trim dial that allows you to adjust it to work well with other fixtures and dimmable LED bulbs. It comes with everything you need to complete the installation, including screws, wire nuts, and even a decorative wall plate.
This high wattage Legrand switch is ideal for 3-way lighting setups. It’s rated to work with loads up to 700W, works with both incandescent and halogen bulbs, and it doesn’t need to be derated when installed in a multi-gang application. That means it’s capable of operating at full capacity regardless of whether it's installed in its own wall box or in a multi-gang box setup. It doesn’t work with either LED or CFL bulbs, so it isn’t the right choice if you don’t plan on using either incandescent or halogen lighting.There are no 4-way dimmer switches, but this kit from Leviton is functionally what you’re looking for if your goal is to operate and dim your lights from three or more locations. The reason 4-way dimmers aren’t possible with traditional switches is due to the way that light switch circuits work, and this kit gets around that problem by not using a traditional light switch circuit. Instead, it uses a primary switch, a companion switch, and a plug-in bridge unit that allows them to connect wirelessly. A grid switch system is made of various mounting and switching components which allow you to mix many types of switches all on the same plate. This can be effective when you want a dimmer switch and an on/off switch on the same face plate. Smart home integration can provide you with a lot of options that aren’t available from a traditional dimmer switch. “Smart switches have gained popularity in the era of home automation,” says Brady. “They can be controlled remotely and integrated into smart home systems.” If that sounds interesting, then you may want to consider a smart dimmer. Brady cautions that it's important to pay special attention to compatibility, as smart dimmers are typically designed to work with smart home systems. Trailing edge dimmers are dimmers used typically with electronic drivers. With this type of dimmer, voltage and current are not rushed to the light source. Compared to leading-edge dimmers, trailing edge dimmers have a low minimum load. It then becomes a better choice for dimming low-powered lighting circuits. This is why they work best with LEDs.
Dimmer switches sometimes need a larger wall box than the switch you’re replacing, and you also need to consider the kind of bulbs you’re using and other factors. We also have a range of Smart Rotary dimmers for use with Multi-Way circuits with Master dimmers and Supplementary Controllers. You can find information on these below. See the V-Pro SmartSupla dimmer that's compatible with WiFi and Smart Home Applications here. Chose bulbs from well-known and trusted brands, such as Tala or Crompton, as they will frequently test features and will be compatible with a wider range of dimmers.
Similar products
Dimmers aren’t all about setting the mood though, and Sampayo says installing them in your home can save you money, too. “Practically speaking, the human eye can't distinguish between 90 percent and 100 percent light brightness, but your energy bill can,” Sampayo advises. “Being conscious of energy consumption means you could set your lights to never exceed 90 percent, ensuring a 10 percent energy saving without compromising on brightness.” Additionally dimmer switches work within a certain operational load range. If your dimmer switch has a range of 0 to 400W, it is possible to have 10 lamps each having 40W on it, or you can have 8 lamps each having 50W. You can have any combination as long as it adds up to a maximum of 400W. LED Lights and Dimmers Leading-edge dimmer switches are cheaper and simpler than trailing-edge, and were used originally to dim incandescent and halogen bulbs or wirewound magnetic transformers. They use a ‘TRIAC’ (Triode for Alternating Current) switch to control power, and are sometimes called TRIAC dimmers.
Trailing edge dimmers are usually found within more modern homes and lighting systems. Trailing edge has several advantages, including less electrical interference and ‘buzzing’ which ultimately gives you more control and silent running. The main benefit of using a trailing edge dimmer is that they are able to handle lower wattage loads, therefore meaning that they are far more suitable for illuminating LED bulbs. This means that you don’t have to sacrifice ambience in your home by reaching the high minimum wattage of a leading-edge dimmer.There are two types of dimmer systems that you can have in your home – trailing edge and leading edge. All of our bulbs and ceiling kits are suitable for trailing edge dimmers only. Because of its energy efficiency and long lifespan, LED lights are often the smartest choice for your home. If you want to create mood lighting and get the most of your LED lights you should use a phase cutting dimmer. This is the most popular among dimming control devices.
Great Deal 
New Comment