Joined in 2023 
82 
63 About this deal
Go to network drive to download your needed package and extract it (in the "01_Official images/03_USB upgrade images). I can see the Apacer AS2280P4 SSD is detected, and it turns out it’s not formatted out of the box, so I just formatted it with mkfs. Device Type : Single Board Computer Brand : FriendlyARM Model : NanoPi R5S Availability : Available 2023 Where available : friendlyelec. Considering even normal gigabit speeds can require quite some tuning to achieve at optimal speeds on arm based hardware. I tried that and generally had problems with picking right IP addresses for the ethX interfaces: I needed to specify either a static one or a DHCP and neither of those makes sense or is necessary for bridging AFAIU (the bridge interface it’s the only one that should have an IP address).
The TP-Link switch is only used as a Gigabit Ethernet switch here connecting the WAN port of the NanoPi R5S router to the internet through Xiaomi AX6000 router in case I have to install some packages on the devices. interface, so I don’t expect to get the full bandwidth, but it should be close to the theoretical 500 MB/sec. New: A brand-new, unused, unopened and undamaged item in original retail packaging (where packaging .A microSD card socket can be found on one of the sides, while the rear panel comes with a USB-C port for power, a WiFi antenna hole (which can also be used to run cables for GPIO. Long-term readers of this blog will know I’ve reviewed MANY FriendlyArm/FriendlyElec boards in the past but things have been quiet for some time now (Covid won’t have helped). In case you’ve an RPi 15W USB-C power brick lying around I would appreciate a test (since this thing being less expensive than any USB PD charger and most probably the best piece of hardware ever manufactured by RPi Trading Ltd. Insgesamt bin ich mit dem NanoPi R5S sehr zufrieden und würde ihn auf jeden Fall jedem empfehlen, der einen zuverlässigen und schnellen Router-ähnlichen Einplatinencomputer sucht.
In our arrangement in the photo below, we used a USB port for the power supply and an HDMI cable hooked to an external display panel. The NanoPi R5S board comes in two main variations equipped with 4GB RAM and 2GB RAM configurations with few changes to the eMMC flash storage capacity. I’m looking for a relatively simple and affordable way to set up a control, especially parental control, for a home network.
What if those advertised throughput numbers from FriendlyELEC were generated with the Ubuntu image and not FriendlyWRT? It’s more about stuff like ‘all NIC IRQs on cpu0’ and other unfortunate affinity settings (see RPS). The current configuration that I have looks right: the bridge interface is up, it’s the only one that has an IP address, all the ethX interfaces are also up yet they don’t have IP addresses.
Es hat mich sehr gefreut, dass das Gerät bei einer Gigabit-Internetverbindung keine Bottleneck hat, was ein großes Plus ist. The 103 third parties who use cookies on this service do so for their purposes of displaying and measuring personalized ads, generating audience insights, and developing and improving products.
The trick in my case was to remove the bridge0 interface between eth1 and eth2, and use these interfaces individually. If you're running a script or application, please register or sign in with your developer credentials here. When you boot with the microSD, a simple GUI will pop up, designed by FriendlyElec company, making this task super easy and fast, even for no tech geeks with previous experience. HOWEVER, after borrowing the WIFI remote control from my normal TV box, I went about testing Android – meanwhile back in Italy, Antonio was doing similar testing. The fit is tight and this time I was really excited when I’ve seen the antenna hole above the USB power port.
Great Deal 
New Comment