LSC 13105589 : GENUINE Clutch Pipe Elbow Connector (Manual Only) - NEW from LSC

Product Information

Stainless Steel braided fuel hose - suitable for commercial fuels and fuel mixtures up to a maximum of 50% Benzol. We also have a massive range of lubrication spares, crankshaft drive spares, and timing control parts. VAT (Value Added Tax) is charged at 20% on all purchases shipped within the UK (with the exception of certain items such as books). For some reason the casing has cracked rendering theclutch inoperative and it seems I will need to replace the second part of the pipe onto which this coupling is bonded. IMPORTANT NOTE: Kindly Be Aware That This Part May Fit Some Other Vehicles Make/Models/Engine Types, Please Refer To Compatibility For Further Information As Variants Are Common In Vehicles And Compatibility Is For Guidance Purpose Only.

Mainly used for brake and clutch lines where, due to its small size,the weight penalty is not too significant. Genuine Saab plastic connector fitted between the clutch pipe and slave cylinder, also connects to reservoir feed pipe. You've probably no chance, I didn't even try I just replaced slave and master so everything was new.

Designed for under bonnet use with push in fittings secured with worm drive clamps or similar fittings in smaller sizes i. It appears that moisture/road-salt has entered around the joint and seized it together, possible expanding in the process and cracking the connector.

The connection is press in bayonet fitting very similar to a JG Guest or Hep2o domestic water pipe fitting. I belive the union on the inner wing is Imperial and the brake pipe connectors at the wishbones are metric. The aluminium corrodes against the stainless and the considerable expansion of aluminium oxide = a ruined fitting that will never separate. We have a full range of car parts for other repairs or servicing on your car, from service, engine, transmission, exhaust, electrics, fuel and emissions, braking systems, and cooling and heating parts. Read more about the condition New: A brand-new, unused, unopened and undamaged item in original retail packaging (where packaging is applicable).

I took the slave cylinder and bulkhead adapter with me and just asked my local hydraulics place to make the hose accordingly. And might have used a spanner over the pipe to give more pushing power on the rear of the mating part. Due to its very low ratio of expansion to pressure, this hose has proved to be ideal for use on flexible lines in competition vehicle braking and clutch systems providing a desirable hard pedal with reduced travel. Adrian gave me for the inner wing block was a surprise if I'm honest as I wasn't expecting metric, but now you've said the same it seems this oddball mix is right.