The wind vane should be mounted on a fence post or pole, or perhaps on a chimney or flat roof. If you plan on fixing your sensor to a chimney, situate it on the side of the prevailing wind – in the UK this is the South East. This personal weather station has a reasonably large sensor array and can measure a number of conditions including: outdoor temperature and humidity, i ndoor temperature and humidity, moon phase and barometric pressure. Another selling point of this weather station is that it can be connected to a huge range of additional sensors to give you even more information on the conditions surrounding your property.

This low-cost twin set of weather stations is perfect for people who like their gadgets to be unobtrusive as they only measure 9.3 x 8.3 x 6.2 cm, and weigh in at just 280 Grams per piece. The fact that there are two of them also gives you a chance to see the differences in humidity, temperature, etc. in various parts of the house.Although most of the readings on this home weather station are fairly accurate, the barometric pressure can be slightly unreliable. Each weather station tends to have a lot of unique features; therefore, it helps to do a bit of research to find the weather station that most appeals to you in terms of what it can measure. Stylish display for full weather information and time related details , Synchronize the time from PC to main display unit

The external sensor measures temperature, humidity, and atmospheric pressure (powered by 3 AAA batteries) outside and thus needs to be placed outdoors. The base unit (powered by 2 AA batteries) measures the temperature, humidity inside the house, calculates the comfort level of the room based on those readings, and displays the result in three modes: humid, good, or dry. The solar-powered 5-in-1 outdoor sensor suite transmits measured values ​​for wind speed, wind direction, humidity, temperature, and rainfall to the base station. Current and historical values are displayed on the colour display of the base station. From the collected data, the weather station calculates a very reliable local weather trend forecast for the next 12 hours, depicted by four graphic symbols. The second top screen shows the current weather conditions in the form of a graphical image, while the two lower screens show the temperatures for outdoor and indoor in large and clear numbers. The indoor unit can display charts and figures, pressure trends, daily minimum and maximum values as well as weather alerts. You can also set high and low alarms for temperature, humidity, barometric pressure, wind gust, rain, dew point and heat index.There was a bit more to setting up this weather station than some of the other models we tested, but the instructions do a good job of guiding you through the process and even advise where to look online for some of the information required to get this product up and running properly.

All of these are available to view in the App, or online via Ecowitt.net and in the 3rd party services that support this sensor type.Some weather stations are only powered by batteries while others will have the option of batteries or a power adaptor like the Youshiko. USB powering features are always welcome of course as they offer versatility – the Kalawen is one such unit that can do this. Don't be caught out by weather extremes: alerts can be programmed to notify you if minimum and maximum values (outdoor temperature, rainfall etc) are exceeded. Key Features Includes a large internal memory. If the receiving/sending signal is temporarily lost, your data is transmitted later when the signal is resumed. Online data access The display console is powered using either disposable batteries or mains power. It’s worth noting that if running on batteries the display isn’t constantly illuminated. You’ll need to push the button at the top to see the display. The three outdoor sensors each require 2 x AA batteries. Best weather station for gardeners: ClimeMET CM9088 New & Improved Digital Wireless Weather Station