3M VHB 4611 Double Sided Adhesive Tape - Designed to create durable and reliable bonds - 19 mm x 3 m, Thickness 1.1 mm, Grey & 5952F Double Sided Adhesive Tape - 19mm x 3m, Thickness 1.1mm, Black

£9.9
FREE Shipping

3M VHB 4611 Double Sided Adhesive Tape - Designed to create durable and reliable bonds - 19 mm x 3 m, Thickness 1.1 mm, Grey & 5952F Double Sided Adhesive Tape - 19mm x 3m, Thickness 1.1mm, Black

3M VHB 4611 Double Sided Adhesive Tape - Designed to create durable and reliable bonds - 19 mm x 3 m, Thickness 1.1 mm, Grey & 5952F Double Sided Adhesive Tape - 19mm x 3m, Thickness 1.1mm, Black

RRP: £99
Price: £9.9
£9.9 FREE Shipping

In stock

We accept the following payment methods

Description

It has unparralelled long term and short term strength and boasts brilliant resistance to humidity, solvents , plasticisers and UV, salt water and alkalines. This tape withstands the test of time and weathering! The term sponge rubber is mainly used to describe open-cell and elastic foams that have a closed, leak-proof outer skin. These are expanded by adding blowing gases made of natural rubber, chloroprene, acrylonitrile-butadiene rubber or similar synthetic rubbers and are classified as porous rubbers. During vulcanisation, the blowing agent inflates the compound and gives the thermoplastic elastomer permanent elasticity. Sponge rubber is generally considered to have poor to hardly any adhesion. Depending on the second material, only individual, special adhesives are available that enable usable bonding. Adhesions of sponge rubber to certain plastics such as polyolefins (polyethylene, polypropylene) or rubber are particularly critical. Further information. The cold-crosslinking HTV silicone rubbers are plastically deformable materials which are used, for example, as cable sheathing, for electrical insulation or for sealing and damping purposes.

Specifically designed to bond Plasticised PVC sheeting and rubberised materials, Suitable for bonding all plastics. Glass Clear UHB Acrylic TapeABS - acrylonitrile-butadiene-styrene is an everyday plastic that is widely used today because of its surface hardness, high impact strength and good resistance to weathering, ageing and chemicals. Unfortunately, the low-energy ABS cannot be glued completely without problems with common adhesives and usually this is only possible after a surface treatment with the solvent methyl isobutyl ketone. However, ABS with ABS can also be bonded with methyl ethyl ketone (MEK) / butanone and dichloromethane (methylene chloride). Optimum procedure: Clean bonding surfaces, dry. Apply one coat of adhesive to one or both sides and allow to flash off briefly before pressing together. Further information. Foams are quite common in everyday life: They are used in everything from upholstery and mattresses to insulation materials. They are based on a wide range of plastics as raw materials. However, not every adhesive is suitable for every material. In view of the wide range of variants, it can therefore be useful to always test how the adhesive behaves on small samples of the material beforehand. Further information.

Offering a cleaner application than liquid adhesives, 3M™ Structural Adhesive Tape SAT1010is a single layer epoxy based adhesive tape for the Automotive industry (BIW), formulated for metal bonding applications. This tape is designed to provide structural bonding strength for various applications, specifically for bonding and isolation of dissimilar materials. In addition to bonding performance, the tape features gap filling properties due to its expansion features. The tape is typically applied during the body in white process. It is run through the automotive paint pre treatment process and then the e coat process. The tape expands and cures in the e coat cure oven to fill and seal small gaps. The tape forms a continuous barrier between similar and dissimilar materials, which minimizes electrical conductivity and helps prevent galvanic interactions.Thin bonding lets your design shine without bulky fasteners by using a virtually invisible industrial-strength bond to attach materials. Using a tape rather than a liquid adhesive allows you to customize the tape to the precise shape you need for the final design, as well as giving you production flexibility by leaving the liner in place until the second substrate is ready. Double coated or adhesive transfer tapes provide shear strength, conformability and high initial adhesion and have industrial applications in electronics, auto interiors, signage and graphics, sporting equipment and much more.

The highly elastic silicone rubber (RTV/HE) is a quite flowable silicone rubber with very high elasticity and at the same time low viscosity. It is particularly suitable for the production of filigree elastic forms with pronounced undercuts. Fields of application are relief casting moulds or moulds for strongly structured decorative panels or wall elements. Silicones, with their low-energy, extremely repellent surfaces, are considered to be difficult or almost impossible to bond. Among the few adhesive products that show usable results here are, for example, new types of silicone transfer adhesives that, in combination with adhesive tapes, even enable efficient automation of series production processes - for example in the automotive sector. Further information.

PP - Polyethylene has become an indispensable part of everyday life. It can be found in pipes, rain barrels, dishwashers and a multitude of industrial components, among other things. However, bonding the material is not without problems due to its repellent surface properties. However, efficient adhesive systems on the market today offer practicable solutions for this. Further information. Any great mechanic knows that to get the best results, you need the best products. While you may have some old glue or tape in the cupboard or the toolbox, car glues, adhesives, tapes and sealants are created to high-standards, which mean they won’t damage or destroy the finish on your car. Silicones - chemically more precisely known as poly(organo)siloxanes or siloxane - are synthetic polymers whose silicon atoms are connected via oxygen atoms (Si-O-Si). They occupy an intermediate position between organic and inorganic compounds. At present well over 10,000 different types of silicone are known. Silicone rubbers are differentiated according to the temperature required for cross-linking. Our tape offering includes reflective tapes, silicone tape, standard masking tapes, and heavy duty masking tapes that are more resistant to weight and weather. Epoxy glues

VHB™ Tape permanently adheres one substrate to another and spreads the stress load across the entire length of the joint With this information, the adhesive and surface treatment can be selected based on technical data sheets, experience and the literature. If it is important, adhesive samples should be made and tested before the adhesives are used. In mechanical testing, the bonded joint is loaded until it breaks. The type of fracture provides information about the quality of the bond and indicates where defects occurred during bonding. An adhesion fracture is when the adhesive detaches from the joined part. A cohesion fracture is a fracture in the adhesive itself and a fracture in the part to be joined describes a fracture outside the adhesive surface in the part to be joined. Acrylic foam tapes, whose adaptable acrylic foam absorbs tension, dampen vibrations and compensate for different, material-dependent temperature expansions. These are suitable for metal/plastic bonding and are used in automotive applications, for example, for bonding decorative and side protection strips, plastic cladding, reflectors and mirror glass. Short-term temperature tolerance up to 260 °C, with an operating temperature tolerance of up to 150 °C When selecting an adhesive, one should consider what the bond must be able to withstand and what stresses the component will be exposed to in use. These are the questions about mechanical, dynamic and static loads, the temperature range, the influence of moisture, other chemical substances or UV radiation. At the same time, the list of requirements should include information on the parts to be joined, the production conditions, specifications for occupational safety and environmental protection, information on long-term resistance and quality assurance, as well as the selected test procedures and costs.Double-sided acrylate foam adhesive tapes for a wide range of applications are available on the market. They're made of closed-cell acrylate adhesive for demanding material combinations or critical plastics with low surface energy such as PE or PP. These are able to absorb forces well and are therefore permanently resistant to tensile, shear, splitting and peeling forces. They're suitable, for example, for car mirror bonding or for the bonding of mouldings and decorative trim. Cleaning and degreasing the plastic surface of loosely adhering dust, oil, grease and separating and processing agents with water or solvents - this does not change the structure of the surface. Cleaning can be carried out by immersion or spraying. Degreasing is done with organic solvents or by pre-drying in the oven. PA - polyamide is high-strength and impact-resistant. Its abrasion and wear resistance combined with excellent sliding properties make it a preferred construction material in machine or vehicle construction. Because of its high mechanical strength, it has now even displaced many metal components in vehicle construction - sometimes reinforced with carbon or glass fibres. But PA is not easy to bond. High bond strengths of PA materials require the use of special pre-treatment methods or specially developed, reactive adhesives. Further information.



  • Fruugo ID: 258392218-563234582
  • EAN: 764486781913
  • Sold by: Fruugo

Delivery & Returns

Fruugo

Address: UK
All products: Visit Fruugo Shop