Crimping pliers for wire ferrules exert pressure on both ferrule and wire from all sides via four crimping parts. In this way, when choosing the right crimping profile or using an automatic crimping tool due to plastic deformation, a mechanically firm and electrically secure connection is achieved. For insulated and non-insulated end sleeves (ferrules) 10, 16, 25 mm². Universal indent crimping die for non-insulated connectors

And innovative support. For example, universally adjustable positioning aids or electronic displays for wear and the necessary calibration for crimping pliers for very sensitive crimp connections. Versatility is also demonstrated by models that, in addition to crimping, are also suitable for stripping and cutting cables. From the inexpensive crimping pliers for wire ferrules as a light and compact hand tool to the compact and universal Multi-Crimp® crimp system pliers and the semi-automatic, electrically driven eCrimp system pliers with over 1,500 interchangeable, different crimp inserts – with KNIPEX you have all the options at hand. Due to the large number of different plug connections, crimping pliers in many different versions are required. As a rule, these pliers are operated with one hand - but there are also models for particularly large conductor cross-sections that facilitate two-hand operation thanks to their favorable design. insulated and non-insulated ferrules (end sleeves) with 10 / 16 / 25 mm² and for non-insulated crimp terminals