STRONG HOLDING POWER: Has twice the tensile holding power compared to similar sized steel fasteners. Won't deteriorate wood: The thermal conductivity of metal nails causes condensation of moisture at the surface of the nail which promotes corrosion and wood deterioration. RAPTOR® fasteners are similar to wood in their thermal conductivity, so they do not cause condensation, corrosion and wood deterioration. Save time/labor: RAPTOR® fasteners can be left in and do not need to be removed. They will not rust, stain, delaminate or cause problems. RAPTOR® fasteners eliminate down-time.

Our plastic staple is a polyurethane T-end fastener specifically designed to be used in the ST9500 machine. The Ecotach™ Plastic Staple (15025-0) is made from a proprietary polyurethane material specifically designed to degrade* at an accelerated rate of 11.91% over 45 days in landfill conditions. The technology used results in no microplastics* so that when this staple completely degrades, all that is left is carbon dioxide, water, and microbes (biomass). Comparatively speaking, a typical thermoplastic polyurethane fastener would degrade ~0% over the same time frame and take anywhere from 20 -30 years to break down, depending on environmental conditions. Once the Ecotach Plastic Staple is placed into a landfill, naturally occurring bacteria in that environment breaks the fastener down without leaving behind microplastics or any other harmful substances.* These products are shelf-stable and will not begin to degrade unless put into the designated end-of-life waste stream. NATURAL BONDING: The shaft of the nail or staple fuses permanently with the material creating a powerful interfacial bond between the fastener and the material.Save money: RAPTOR® fasteners will save on bit, blade and abrasive damage and the down-time to replace bits, blades or abrasives from metal nail damage so manufacturing costs are reduced.

Save time: RAPTOR® fasteners sand down with the wood and accept stain so there is no need to putty, saving one step in production and the appearance is better than putty. No electrolysis or galvanic corrosion: RAPTOR® fasteners are completely non-metal and cannot rust, oxidize, corrode or cause galvanic corrosion of other metals. Can be worked like wood: RAPTOR® fasteners can be cut, shaped and sanded with the wood without damaging bits, blades or abrasives.

Sign up for special offer emails