The quality of the diamond is important, as this will affect how well the blade cuts. A higher quality diamond will be harder and will stay sharper longer. However, they are also more expensive.

There is another method of removing the required portion. Place the stone on an overhanging surface or a table. Hit the stone (the portion that’s not required) with a hammer or a rubber mallet. Concrete saws: also known as grinders, these heavy-duty models have large and powerful blades with teeth made from industrial diamonds or similar materials. Despite the name, they are also an effective cutting solution for cutting through masonry and similar materialsUsing a circular saw is not a very daunting task. Of course, you need to be extra careful and follow all the instructions mentioned above. The first time can be intimidating for some, but if you do it just once, you will understand how it works, and the task will be a piece of cake for you. Clamp the target material firmly in place if you plan to make any angular cuts. For larger pieces of material, an insulation pad may be a better choice. If your material includes veneer (e.g. plywood) place this face down so it does not break off during the cut and obstruct progress Like all power tools, circular saws can cause serious injury. Here are some of the most common hazards to watch out for: If we are talking about a wider blade, so long as the saw has a strong enough motor to power it, there should not be any problems. Of course, it all depends on whether or not the arbor of the saw is designed to handle blades of differing kerfs. Summary Lay the stone on a flat surface. The surface that you choose to use plays a vital role. A slippery surface can be a hindrance in the whole process.

Hypoids: these have a similar design to worm drives, but they run more quietly because they feature a greater number of mechanical rather than electrical components. They are a good choice for cutting hard or damp wood Masonry cutting can be tough work, but with the right tools, it’s definitely doable. Just take your time and follow any safety instructions that come with your blade – and don’t forget ear and eye protection! FAQs Can You Use Any Blade in a Circular Saw?However, on that note, a smaller blade, due to the way in which gravity and centrifugal force work, is put under less stress than a larger blade. In other words, a smaller blade has the ability to travel at much faster speeds without the risk of breaking. The smaller the blade, the more speed and centrifugal force it can handle. Can You Use a Larger Blade on Your Circular Saw? Mini circular saws are compact, light, highly portable and often cordless models designed for smaller tasks where the use of a full-size circular saw is not necessary. They are ideal for working in confined spaces and typically include the same feature set as the larger models. Cordless Circular Saws However, if you have a diamond blade or a carbide-tipped blade, then you will be able to cut through concrete. Just keep in mind that these blades will wear down much faster than steel blades when cutting through concrete. Can You Put Masonry Blade on Circular Saw? It would be best for you if you take protection to avoid any mishap. Generally, precautions include: